Rotary Kiln

1. Low pressure drop pre heaters 2. Raw mill equipped with High efficiency separator

Rotary Kilns are commonly used for heat processing of minerals and aggregates such as lime, cement, and iron ore. To achieve consistent quality results, it is important to maintain a uniform product temperature at the kiln entry, mid zone, and discharge. In most rotary kilns, the challenge with temperature process control is that the temperature sensor must view through flames or heavy smoke and dust. Consequently, when selecting a sensor, the design, wavelength, and alignment are all important considerations.

    Our high-performance dual-wavelength sensors offer unequalled performance for accurate and repeatable measurements on kiln applications. These sensors can operate properly when the target energy signal is diluted over 99% by such things as dust and smoke. To effectively measure targets through flames, the 1400 and 4400 Series are recommended. These single-wavelength sensors utilize a very narrow band 3.8 micron filter that provides unequalled performance with measurements through flames.

    Common process measurements include:     Hot Clinker Detection     Product Discharge Temperature     Product Entry Temperature     Mid-Zone Temperature     Combustion Gas Temperature     Kiln Shell Hot Spot Detection

Contact with me for details if you want to use rotary kiln in your local side.

Spec.			Φ3*48	Φ3.2*50	Φ3.2*50	Φ3.3*50	Φ3.5*54
Capacity(t/d)			700	1000	1200	1200	1500-1800
Slope of the kiln shell(%)			3.5	3.5	4	4	4
Supporters numbers (piece)			3	3	3	3	3
Type of thrust roller			Mechanical or dydraulic	Dydraulic	Dydraulic	Dydraulic	Dydraulic
Rotated speed	Main driving (r/min)		0.676-3.38	0.36-3.57	0.4-4.07	0.36-3.57	0.39-3.9
	Auxiliary driving(r/min)		9.36	6.5	6.5	5.61	7.66
Main driving	Motor	Type	Z2-101	ZSN4-280-091B	ZSN4-280-11B	ZSN4-280-091B	ZSN4-315-092B
		Rated power(kw)	100	160	190	160	220
		Speed regualtion range (r/min)	-1500	-1500	-1500	-1500	-1000
		Rated voltage(V)	440	440	440	440	440
	Reducer	Type	ZS145-1-1	ZSY450-40-V	ZSY450-40-V	ZSY450-40-V	NZS995-28VIBL
		Total ratio	49.63	40	40	40	28
	Tachometer generator	Rated power(kw)	22	22	22	22	22
		Speed measurement range(r/min)	0-2000	0-2000	0-2000	0-2000	0-2000
		Max. voltage(V)	110	110	110	110	110
Auxiliarydrive	Motor	Type	Y160M-6	Y160M-4B	Y160M-4B	Y160M-4B	Y200L1-6
		Rated power(kw)	7.5	15	15	11	18.5
		Speed scope(r/min)	970	1460	1460	1460	970
		Rated voltage(V)	380	380	380	380	380
	Reducer	Type	ZL35-7-I	ZSY160-31.5	ZSY160-31.5	ZSY160-31.5	ZSY355
		Total speed ratio	14	31.5	31.5	31.5	45
Total weight (refractory brick not included(T)			213	280.6	280.6	317	341

Rotary Kiln